B-Class car manuals
Mazda 2: Fuses - Owner Maintenance - Maintenance and Care - Mazda2 Owners Manual

Mazda 2: Fuses

Mazda2 Owners Manual

Your vehicle's electrical system is protected by fuses.

If any lights, accessories, or controls do not work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted.

If the same fuse blows again, avoid using that system and consult an expert repairer, we recommend an Authorised M

Fuse Replacement

Replacing the fuses on the vehicle's left side

If the electrical system does not work, fi rst inspect the fuses on the vehicle's left side.

  1. Make sure the ignition is switched off, and other switches are off.
  2. Open the fuse panel cover.

Replacing the fuses on the vehicle's left side


  1. Pull the fuse straight out with the fuse puller provided on the fuse block located in the engine compartment.

  2. Inspect the fuse and replace it if it is blown.

  3. Insert a new fuse of the same amperage rating, and make sure it fi ts tightly. If it does not fi t tightly, have an expert install it. We recommend an Authorised Mazda Repairer.

    If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the AUDIO or OUTLET circuit.

CAUTION

Always replace a fuse with a genuine Mazda fuse or equivalent of the same rating. Otherwise you may damage the electric system.

  1. Reinstall the cover and make sure that it is securely installed.

Replacing the fuses under the bonnet

If the headlights or other electrical components do not work and the fuses in the cabin are normal, inspect the fuse block under the bonnet. If a fuse is blown, it must be replaced. Follow these steps:

  1. Make sure the ignition is switched off, and other switches are off
  2. Remove the fuse block cover.

Replacing the fuses under the bonnet


  1. If any fuse but the MAIN fuse is blown, replace it with a new one of the same amperage rating .

WARNING

Do not replace the main fuse and multiplex slow blow fuse by yourself.

Have an Authorised Mazda Repairer perform the replacement: Replacing these fuses by yourself is dangerous because they are high current fuses. Incorrect replacement could cause an electrical shock or a short circuit resulting in a fire.

  1. Reinstall the cover and make sure that it is securely installed.

Fuse Panel Description

Fuse block (Engine compartment)

Fuse block (Engine compartment)


Fuse block (Engine compartment)


Fuse block (Engine compartment)


Fuse block (Left side)

Fuse block (Left side)


Fuse block (Left side)


    Light Bulbs

    Appearance Care

    Other info:

    Citroen C3. Instruments and controls
    1. Audio equipment steering wheel controls. 2. Steering lock and ignition. 3. Wipers/wash-wipe/trip computer controls. 4. Instrument panel. 5. Scented air freshener. 6. Driver’s airb ...

    Skoda Fabia. Parking aid
    WARNING The parking aid is not a substitute for the driver paying proper attention and it is always the driver's responsibility to take care when reversing the vehicle or carrying out simil ...

    Nissan Micra. Antenna
    The antenna can be folded down toward the rear of the vehicle 1 . The antenna cannot be shortened but can be folded down or removed. When you need to remove the antenna, turn the antenna rod ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0137