Peugeot 208: Moving off
Peugeot 208 Owners Manual
- Select position N.
- Press the brake pedal fully.
- Start the engine.
N appears in the instrument panel.
N flashes in the instrument panel screen if the gear lever is not in position N on starting.
- Select first gear (position M or A ) or reverse (position R)
- Release the parking brake.
- Progressively take your foot off the brake pedal, then move off.
AUTO and 1 or R appear in the instrument
panel.
You must press the brake pedal while starting the engine.
Stopping - Moving off on a slope
When stopping on a slope, do not use the accelerator to immobilise the vehicle; apply the parking brake.
When moving off on a slope, accelerate gradually while releasing the parking brake.
Other info:
Mazda 2. Operational Range
The system operates only when the driver
is in the vehicle or within operational
range while the key is being carried.
NOTE
When the battery power is low, or in
places where there are high-intens ...
Chevrolet Sonic. Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See Engine Compartment Overview for
the location of the reservoir.
There are ...
Mazda 2. Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element w ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
