The cruise control allows driving at a speed between 23 - 89 mph (37 - 144 km/h) without keeping your foot on the accelerator pedal.
To turn on the cruise control, push the ON/OFF switch. The CRUISE indicator light in the instrument panel comes on.
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. Take your foot off the accelerator pedal. Your vehicle maintains the set speed.
To cancel the preset speed, use one of the following three methods.
The cruise control is automatically canceled if:
The preset speed is deleted from memory.
To reset at a faster cruising speed, use one of the following three methods.
When the vehicle attains the speed you desire, release the switch.
Each time you do this, the set speed increases by about 1 mph (1.6 km/h).
To reset at a slower cruising speed, use one of the following three methods.
Each time you do this, the set speed decreases by about 1 mph (1.6 km/h).
To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 23 mph (37 km/h).
Peugeot 208. Unlocking the vehicle Complete unlocking
Using the key
Turn the key to the front of the vehicle to unlock the vehicle.
Using the remote control
Press the open padlock
to unlock the vehicle.
Unlocking is confirmed by rapid flashing of ...
Renault Clio. Starting, Stopping the engine
Remote control RENAULT card
When you get into the vehicle, insert
the RENAULT card integrated key,
pointing towards you, fully into the card
reader 2.
To start, press button 1. If a gear is ...
Seat Ibiza. Digital display in the instrument panel
Digital clock
– Turn the setting knob, fig. 32
anti-clockwise to the stop to set the hour. If the knob is turned briefly anti-clockwise
the clock will advance one hour further. – Turn ...