The following procedures will help you get started using the Bluetooth® Hands-Free Phone System.
Choosing a language
To change the language, perform the following.
To select the current language, press the PHONE/SEND ( ) button. To select a different language, push the tuning switch ( or ) left or right.
NOTE: You must press the button within 5 seconds to change the language.
Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled.
The connecting procedure of the cellular phone varies according to each cellular phone model. Refer to the cellular phone Owner’s Manual for details.
When prompted for a Passkey code, enter “1234” from the handset. The Passkey code “1234” has been assigned by NISSAN and cannot be changed.
Making a call by entering a phone number
Say: “Special Number” to dial more than 10 digits or any special characters.
For additional information, refer to “List of commands” in this section.
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the call has ended, press the
button
on the steering wheel.
NOTE:
If you do not wish to take the call when you
hear the ring tone, press the
button
on the steering wheel.
For additional information, refer to “List of commands” in this section.
Chevrolet Sonic. System Settings
Configuring the Number of Favorite Pages
To configure the number of available favorite pages:
1. Press the Push/MENU/TUNE button.
2. Select Radio Settings.
3. Select Radio Favorites.
4. Select ...
Citroen C3. "ISOFIX" mountings
Your vehicle has been approved in accordance
with the new ISOFIX regulation .
The seats, represented below, are fi tted
with regulation ISOFIX mountings:
These are three rings for each seat:
...
Mazda 2. Floor Mat
WARNING
Make sure the fl oor mats are secured
with the grommets or the retainers to
prevent them from bunching up under
the foot pedals (Driver's side):
Using a fl oor mat that is not secured is
...