WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. |
For additional information, refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections of this manual before installing a child restraint.
Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined weight of the child and the child restraint is greater than 65 lbs (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats:
Rear-facing – step 1
Always follow the child restraint manufacturer’s instructions.
Rear-facing – step 2
Rear-facing – step 3
Rear-facing – step 4
Rear-facing – step 5
Rear-facing – step 6
After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
Fiat Punto. Types of bulbs
Various types of bulbs are fitted to your car:
All glass bulbs: these are pressed on. Pull to remove.
Bayonet type bulbs: press the bulb, and turn counterclockwise to
remove this type of b ...
Citroen C3. Checks
Protects the components of the engine
and provides access for checking levels.
Opening
Open the front left door.
Pull the interior control A , located at
the bottom of the door aperture.
...
Chevrolet Sonic. Top Tether Anchor
A top tether (3, 4) anchors the top of the child restraint to the vehicle. A
top tether anchor is built into the vehicle. The top tether attachment (2) on the
child restraint connects to the top ...