Head restraint height adjustment
To raise the head restraint, pull it upwards.
To remove the head restraint, press the lug A and pull the head restraint upwards.
To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.
To lower the head restraint, press the lug A and the head restraint at the same time.
The head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly.
Access to the rear seats (3-door)
Pull only this control upwards to fold the seat back and move the seat forward.
When put back in place, the seat returns to its initial position.
Ensure that no person or object prevents the seat slide from returning to its initial position; the return to this position is necessary for longitudinal locking.
Check that the seat belt has reeled in correctly so as to not impede access for passengers to the rear seats.
Peugeot 208. Gear lever
R. Reverse
With your foot on the brake, move the lever forwards to select this position.
N. Neutral.
With your foot on the brake, select this position to start the engine.
A . Automated mode.
M ...
Chevrolet Sonic. Seat Adjustment
Manual Seats
Warning
You can lose control of the vehicle if you try to adjust a driver seat while
the vehicle is moving. Adjust the driver seat only when the vehicle is not moving.
To adjust a ...
Honda Fit. Light Switches
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
■ High beams
Push the lever forward until you hear a click.
■ Low beams ...