Peugeot 208: Moving off
Peugeot 208 Owners Manual
- Select position N.
- Press the brake pedal fully.
- Start the engine.
N appears in the instrument panel.
N flashes in the instrument panel screen if the gear lever is not in position N on starting.
- Select first gear (position M or A ) or reverse (position R)
- Release the parking brake.
- Progressively take your foot off the brake pedal, then move off.
AUTO and 1 or R appear in the instrument
panel.
You must press the brake pedal while starting the engine.
Stopping - Moving off on a slope
When stopping on a slope, do not use the accelerator to immobilise the vehicle; apply the parking brake.
When moving off on a slope, accelerate gradually while releasing the parking brake.
Other info:
Chevrolet Sonic. What to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids
and Lubricants.
Always clean the brake/clutch fluid reservoir cap and the area around the cap
before removing it. Th ...
Chevrolet Sonic. Lower Anchor and Top Tether Anchor Locations
(Top Tether Anchor): Seating positions
with top tether anchors.
(Lower Anchor): Seating positions
with two lower anchors.
To assist in locating the lower anchors, each seating position with ...
Peugeot 208. Operating fault
In the event of a malfunction
of the system, when reverse gear is engaged this warning lamp is displayed in the
instrument panel and/or a message appears in the screen, accompanied by an audible ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
