Peugeot 208: Programming
Peugeot 208 Owners Manual
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE).
Set the programmed speed by accelerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)).
You can then change the programmed speed using buttons 2 and 3:
- by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press.
Switch off the cruise control by pressing button 4 : the screen confirms that it has been switched off (PAUSE).
Switch the cruise control back on by pressing button 4 again.
Other info:
Skoda Fabia. Fastening systems
ISOFIX system attachment points
Fig. 16 ISOFIX system label
There are two locking eyes between the rear exterior seats for fixing the
ISOFIX system child seat in place.
The places are marked ...
Seat Ibiza. Ignition lock
Position of the ignition key
Fig. 100 Ignition key positions
Ignition switched off, steering lock
In the position ⇒ fig. 100 the ignition and the engine are OFF and the steering
may be ...
Chevrolet Sonic. Wheel Replacement
Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel
nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced.
If the wheel leaks air, replace it ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
