Renault Clio: Air vents conditioning and heating system
Renault Clio IV (2014-2019) Owners Manual / Your comfort / Air vents conditioning and heating system
- left-hand side window demister vent.
- left-hand side air vent.
- windscreen demisting vents.
- centre air vents.
- right-hand side air vent.
- right-hand side window demister outlet.
- passenger footwell heater outlets.
- control panel.
Centre air vents.
Air flow
Move the control knob 9 (beyond the resistance point).
Upwards: opened to maximum.
Down: closed.
Direction
Move cursors 10 to the required position.
Side air vents
Air flow
To open air vent 11, press on the air vent (point 12) until it is open as far as required.
Direction
To direct the air flow, swivel side air vent 11.
To remove bad odours from your vehicles, only use the systems designed for this purpose. Consult an approved Dealer.
| Do not add anything to the
vehicle’s ventilation circuit
(for example, to remove
bad odours). There is a risk of damage or of fire. |
READ NEXT:
Manual air conditioning
The controls
Adjusting the air temperature.
Adjusting the ventilation speed.
Air conditioning.
Distribution of air in the passenger
compartment.
De-icing/demisting of the rear screen
Automatic climate control
The controls
Automatic mode.
Air temperature adjuster.
“Clear View” function.
Passenger compartment air distribution
adjustment.
Air conditioning control.
Adjusting the ventila
Air conditioning: information and advice on use
Advice on use
In some situations, (air conditioning
off, air recirculation activated, ventilation
speed at zero or low, etc.) you may
notice that condensation starts to form
on the windows and wi
SEE MORE:
Hill start assistance
This function assists the driver when
starting on hills. It prevents the vehicle
from rolling backwards, depending on
the slope, by automatically applying the
brakes when the driver lifts his/her foot
off the brake pedal to depress the accelerator
pedal.
System operation
It only operates whe
Sequential gearbox engine speed sensor: Removal - Refitting
D4F, and JA3
REMOVAL
I - REMOVAL PREPARATION OPERATION
IMPORTANT
Before any operation on the sequential system,
discharge the accumulator using the Diagnostic
tool.
To discharge the accumulator, run command
" Discharge pressure accumulator " AC081.
To confirm the pressure drop, read the " Hydr
© 2016-2024 Copyright Renault Clio Owners Club
