B-Class car manuals
Peugeot 208: Stopping the vehicle - Automatic gearbox - Driving - Peugeot 208 Owners Manual

Peugeot 208: Stopping the vehicle

Peugeot 208 Owners Manual

Before switching off the engine, you can engage position P or N to place the gearbox in neutral. In both cases, apply the parking brake to immobilise the vehicle.

If the lever is not in position P , when the driver's door is opened or approximately 45 seconds after the ignition is switched off, a warning message appears in the screen.

Return the lever to position P; the message disappears.

    Manual operation

    Operating fault

    Other info:

    Renault Clio. To refit a wheel
    A wheel size larger than 15” cannot be installed under the vehicle. To carry out this operation, the cable must be unwound. If the cable has been wound back up on its ow ...

    Chevrolet Sonic. Vehicle Messages
    DIC messages display when the status of the vehicle has changed and action may be needed to correct the condition. Multiple messages appear one after another. Press any of the DIC buttons on the tu ...

    Fiat Punto. Brake fluid
    Unscrew cap and check that the fluid level in the reservoir is at maximum. Fluid level in the reservoir shall not exceed the MAX mark. If fluid has to be added, it is suggested to use the brake ...

    Manuals For Car Models



    В© 2016-2021 Copyright www.b-auto.net 0.0119