The engine oil life system calculates engine oil life based on vehicle use and
displays the %CHANGE message on the
DIC when it is necessary to change the engine oil and filter.
Remember, the oil life display must be reset after each oil change. It will not reset itself.
Resetting the Oil Life System
1. Press the MENU button to show Remaining Oil Life on the display. This display shows an estimate of the oil’s remaining useful life. If 99% is displayed, that means that 99% of the current oil life remains.
2. To reset the engine oil life system, press the SET/CLR button while the oil life display is active. After a few seconds, there will be a single chime and the oil life will be reset to 100%.
Be careful not to reset the oil life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change.
See Engine Oil Life System.
Fiat Punto. Annual inspection schedule
For cars with an annual mileage of below 20,000 km
(for example about 15,000 km) the following yearly
inspection programme is advised:
check tyre conditions/wear and adjust pressure if
require ...
Honda Fit. Locking/Unlocking the Doors from the Inside
Using the Lock Tab
■ Locking a door
Pull the lock tab rearward.
■ Unlocking a door
Push the lock tab forward.
Models with remote transmitter
When you lock the door using the lock ...
Chevrolet Sonic. Passenger Airbag Status Indicator
The vehicle has a passenger sensing system. See Passenger Sensing
System for important safety information. The instrument panel has a
passenger airbag
status indicator.
United States
...