To engage the gears, press the clutch pedal fully and shift the gear lever into one of the required positions (the diagram is shown on the knob).
IMPORTANT The car can only be put into reverse gear when it has stopped moving completely. With the engine running, before engaging the reverse, wait at least 2 seconds with the clutch pedal fully down to prevent damage and grating of the gears.
To engage reverse (R) from neutral proceed as follows:
To change gears properly
you must push the clutch pedal fully down. It is therefore essential that there is nothing under the pedals: make sure mats are lying flat and do not get in the way of the pedals. |
Do not drive with your
hand resting on the gear lever as the force exerted, even if slight, could lead over time to premature wear on the gearbox internal components. |
Seat Ibiza. Coolant
Coolant specifications
Coolant is a mixture of water and at least 40% coolant additive. The cooling
system must be filled with a mixture of water and at least 40 % of our coolant additive
G 12+ o ...
Citroen C3. Manual air conditioning
Manual control panel
Electric control panel
The heating/ventilation or air conditioning
systems can only operate with the
engine running.
1. Temperature adjustment
Turn the dial from blu ...
Skoda Fabia. Automatic transmission
WARNING
Do not depress the accelerator if the forward driving mode is
changed
when the vehicle is halted and the engine is running – there is a risk of an
accident.
Never shift the sele ...