i-ELOOP is a regenerative braking system. When you depress the brake pedal or use engine braking, the kinetic energy that occurs is converted to electrical energy by the power generator and the converted electrical energy is stored in the storage device. The stored electricity is used as power to charge the battery and the vehicle's electrical devices.
CAUTION
High-current electricity fl ows through the following parts, therefore do not touch them.
NOTE
For details, go to the following URL.
http://www.mazda.com/csr/environment/recycling
i-ELOOP Indicator Light/Control Status Display
The driver is notifi ed of the i-ELOOP power generating status and the vehicle conditions by the i-ELOOP indicator light (green) and the control status display.
i-ELOOP Indicator Light (Green) (vehicle without type C/type D audio)
The light turns on during power
generation.
Control status display (vehicles with type C/type D audio)
The i-ELOOP power generating status is displayed in the centre display.
Refer to Control Status Display on page 4-90 .
Renault Clio. Headlight adjustment
On vehicles fitted with this function,
control A allows you to adjust the height
of the beams according to the load.
Turn control A downwards to lower the
headlights and upwards to raise the ...
Honda Fit. Adding Engine Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten
it securely.
4. Wait for three minutes and recheck the
engine oil dipstick.
...
Skoda Fabia. Full wheel trim
Pulling off
Hook the clamp found in the vehicle tool kit » page 158 into the
reinforced
edge of the wheel trim.
Push the wheel wrench through the clamp, support on the tyre and pull
off ...