B-Class car manuals
Nissan Micra: Getting started - Bluetooth® Hands-Free Phone System
(if so equipped) - Display screen, heater, air conditioner, audio and phone systems - Nissan Micra Owners Manual

Nissan Micra: Getting started

Nissan Micra Owners Manual

The following procedures will help you get started using the Bluetooth® Hands-Free Phone System.

Choosing a language

To change the language, perform the following.

  1. Press and hold the button for more than 5 seconds.
  2. Press the button.
  3. The system announces the current language and gives you the option to change the language.

    To select the current language, press the PHONE/SEND ( ) button. To select a different language, push the tuning switch ( or ) left or right.

    NOTE: You must press the button within 5 seconds to change the language.

  4. If you decide not to change the language, do not press either button. After 5 seconds, the session will end, and the language will not be changed.

Connecting procedure

NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled.

  1. Press the button on the steering wheel. The system announces the available commands.
  2. Press the button again to connect phone. If phone is already connected push the tuning switch ( or ) to find the desired command.
  3. The system acknowledges the command and announces the next set of available commands. Then asks you to initiate connecting from the phone handset.

    The connecting procedure of the cellular phone varies according to each cellular phone model. Refer to the cellular phone Owner’s Manual for details.

    When prompted for a Passkey code, enter “1234” from the handset. The Passkey code “1234” has been assigned by NISSAN and cannot be changed.

Making a call by entering a phone number

Nissan Micra. Making a call by entering a phone number


  1. Press the button on the steering wheel. A tone will sound.
  2. Say: “Call” A . The system acknowledges the command and announces the next set of available commands.
  3. Say “Phone Number” B . The system acknowledges the command and announces the next set of available commands.

    Say: “Special Number” to dial more than 10 digits or any special characters.

  4. Say the number you wish to call starting with the area code in single digit format C . If the system has trouble recognizing the correct phone number, try entering the number in the following groups: 3-digit area code, 3-digit prefix and the last 4-digits. For example, 555-121-3354 can be said as “five five five” as the 1st group, then “one two one” as the 2nd group, and “three three five four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Number”.
  5. When you have finished speaking the phone number, the system repeats it back and announces the available commands.
  6. Say: “Dial” D . The system acknowledges the command and makes the call.

For additional information, refer to “List of commands” in this section.

Receiving a call

When you hear the ring tone, press the
button on the steering wheel.

Once the call has ended, press the
button on the steering wheel.

NOTE: If you do not wish to take the call when you hear the ring tone, press the
button on the steering wheel.

For additional information, refer to “List of commands” in this section.

    Control buttons

    List of commands

    Other info:

    Mazda 2. SRS Air Bag Deployment Criteria
    This chart indicates the applicable SRS equipment that will deploy depending on the type of collision. (The illustrations are the representative cases of collisions.) X : The SRS air bag eq ...

    Honda Fit. Online Reference Owner's Manual
    This owner’s manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold. This owner’s manual covers all models of your vehicle. You may find ...

    Nissan Micra. NISSAN Vehicle Immobilizer System
    The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of the registered key. If the engine fails to start using a registered key (for example, when interferenc ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0136