B-Class car manuals
Nissan Micra: NISSAN Vehicle Immobilizer System - Ignition switch - Starting and driving - Nissan Micra Owners Manual

Nissan Micra: NISSAN Vehicle Immobilizer System

Nissan Micra Owners Manual

The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of the registered key.

If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedure:

  1. Leave the ignition switch in the ON position for approximately 5 seconds.
  2. Place the ignition switch in the OFF or LOCK position, and wait approximately 10 seconds.
  3. Repeat steps 1 and 2.
  4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key.

If the no start condition re-occurs, NISSAN recommends placing the registered key on a separate key ring to avoid interference from other devices.

    Ignition switch positions

    Before starting the engine

    Other info:

    Mazda 2. Fuses
    Your vehicle's electrical system is protected by fuses. If any lights, accessories, or controls do not work, inspect the appropriate circuit protector. If a fuse has blown, the inside element w ...

    Peugeot 208. Manual controls
    The wipers are controlled directly by the driver. Model without AUTO wiping Model with AUTO wiping Windscreen wipers Wiping speed: Rear wiper Rear wiper selection ring: park, intermi ...

    Peugeot 208. Stop & Start
    Going into engine STOP mode The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby: - with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0126