The vehicle should be driven with the VDC system on for most driving conditions.
If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off.
To turn off the VDC system, push the VDC OFF switch. The indicator will come on.
Push the VDC OFF switch again or restart the engine to turn on the system. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual.
Fiat Punto. Warniing liights and messages
General warnings
Failure indications shown (only for some versions)
on the reconfigurable multifunction display
together with buzzer sounding (adjustable) and
warning light (if any) coming on on t ...
Mazda 2. Maintenance Monitor
Maintenance Monitor (Type A/Type B audio)
“Oil Change” with fl exible setting *1 is available. Consult an Authorised
Mazda Repairer for
details*2 . When the engine oil fl exible maintenance se ...
Skoda Fabia. Checking the battery electrolyte level
Fig. 132 Vehicle battery: Electrolyte level indicator
On vehicles with a vehicle battery fitted with a colour indicator » Fig. 132,
the
electrolyte level can be determined by looking at th ...