Renault Clio: Rear parcel shelf

Removal

Renault Clio. Removal


Renault Clio. Removal


To refit, proceed in the reverse order to removal.

Maximum weight on rear parcel shelf: 25 kg, evenly distributed.

Utility version

Renault Clio. Utility version


Unclip mountings 3 on either side of the parcel shelf, then remove it via the boot.

To refit it, proceed in the reverse order to removal.

Do not place any objects, especially heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

READ NEXT:

 Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1 Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot. Guide the lugg

 Boot storage

Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3.

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks

SEE MORE:

 Front bumper: Stripping - Rebuilding

EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5, and DOCUMENTATION PHASE 1 STRIPPING I - STRIPPING PREPARATION OPERATION Remove the front bumper (see 55A, Exterior protection, Front bumper: Removal - Refitting, 55A-1). II - STRIPPI

 Braking circuit: Bleed

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair (see 30A, General information, Brake circuit: Precautions for the repair, 30A-2). This procedure must be applied after one of the followin

© 2016-2024 Copyright Renault Clio Owners Club