B-Class car manuals
Fiat Punto: Controls - Dashboard and controls - Fiat Punto Owners Manual

Fiat Punto: Controls

Fiat Punto Owners Manual

HAZARD LIGHTS


They come on when switch is
pressed regardless of the position of the ignition key.

When the device is on, the switch is flashing and warning lights and

on the cluster come on.

Press the switch again to turn the lights off.

FRONT FOG LIGHTS (where provided)

Press button ; to activate these
lights it is necessary to have the side/taillights switched on and warning light on the cluster come on.


Press the button again to turn these lights off.

REAR FOG LIGHT

Press button ; to activate this
light it is necessary to have the dipped beam headlights switched onand warning light on the cluster come on.


Press the button again to turn these lights off.

HEATED REAR WINDOW

Press button to turn it on. The
device is automatically switched off after about 20 minutes.

The use of hazard
lights is governed by the Road Traffic Code of the country you are in. Keep to the rules.

FUEL CUT-OFF SWITCH (FIS)

Fuel cut-off switch


It is located under the dashboard on the front right-hand door pillar and it comes into operation in the case of an accident to block the supply of fuel thereby stopping the engine.

Carefully inspect the car to find fuel leaks, e.g. in the engine compartment, under the car or near the tank.

If no fuel leaks are found and the car can be started again, press button (A) to reset the fuel system and the lights.

After a crash, remember to turn the ignition key to STOP to prevent battery run-down.

If, after a crash, you
smell fuel or see leaks from the fuel system, do not reset the switch to avoid fire risk.
    Ceiling lights

    Interior fittings

    Other info:

    Nissan Micra. Specifications
    Engine This spark ignition system complies with the Canadian standard ICES-002. Wheels and tires Dimensions and weights ...

    Chevrolet Sonic. Shifting out of Park (Automatic Transmission)
    This vehicle is equipped with a shift lock control. The shift lock control is designed to: Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully ...

    Mazda 2. Tyres
    For reasons of proper performance, safety, and better fuel economy, always maintain recommended tyre infl ation pressures and stay within the recommended load limits and weight distribution. WARN ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0106