Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system:
1. Press the MENU button to show Remaining Oil Life on the display. This display shows an estimate of the oil’s remaining useful life. If 99% is displayed, that means that 99% of the current oil life remains.
2. To reset the engine oil life system, press the SET/CLR button while the oil life display is active. After a few seconds, there will be a single chime and the oil life will be reset to 100%.
Be careful not to reset the oil life display accidentally at any time other than after the oil is changed. It cannot be reset accurately.
If the %CHANGE message in the DIC
comes back on when the vehicle is started, the engine oil life system has not reset.
Repeat the procedure.
Nissan Micra. System maintenance
CAUTION
Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration.
Do not damage the camera as the monitor
screen may be adversely affect ...
Fiat Punto. Rain sensor (where provided)
The rain sensor is behind the driving mirror in contact with the
windscreen and has the purpose of automatically adjust, during the
intermittent operation, the frequency of the windscreen wiper stro ...
Fiat Punto. Jump starting
If the battery is flat, it is possible to start the engine using an auxiliary
battery with the same capacity or a little higher than the flat one.
Proceed as follows:
Connect positive terminal ...