B-Class car manuals
Fiat Punto: Extending the boot - Boot - Dashboard and controls - Fiat Punto Owners Manual

Fiat Punto: Extending the boot

Fiat Punto Owners Manual

Single rear seat

Proceed as follows:

  • fasten the seat buckles to the tabs on the seat back (as shown by arrows);
  • check that the webbing (A) of each of the two side seat belts is inserted into the respective belt guiding catch (B);
  • release the seat back moving the levers (C) as shown by the arrow.

    Tilt it to make a single loading surface with the boot floor.

Single rear seat


Split rear seat back (where provided)

The boot can be extended completely or partially.

For partial extension fold the required seat side; proceed as follows:

  • remove the parcel shelf (see next paragraph);
  • press the button by the side of the two supports and remove the head restraints by pulling them upwards;
  • check that the webbing (A) of each of the two side seat belts is inserted into the respective belt guiding tongue (B);
  • release the seat back moving lever (C), then tilt it.

Split rear seat back


To fold the whole seat, lift the cushion and then tip the seat backs as described for the rear single seat.

The central three-point seat belt and reel mechanism (where fitted) can be removed as follows:

  • press the black button on the buckle (A) if the seat belt is fastened;
  • take the central belt slowly to the loop retainer (B) on the upper part of the seat back and remove the second tongue (C) from the loop retainer;
  • remove the first tongue (D) from the loop retainer and fasten it to the specific pin (E) on the rear pillar panel;

To restore conditions for use:

  • release the first tongue (D) from pin (E);
  • insert the first tongue (D) in loop retainer (B) without twisting the belt. Make notch (F) on the belt tongue coincide with the respective groove on the loop retainer and insert the second tongue (C) in the loop retainer;
  • pull the belt gently through loop retainer (B), and fasten the first tongue (D) in buckle (A) (grey with black button). Make the two yellow dots (one on the tongue and one on the buckle) coincide.

Split rear seat back


    Tailgate closing

    Rear window shelf removal

    Other info:

    Mazda 2. Collection/Disposal of Old Equipment/Used Battery
    Information for Users on Collection and Disposal of Old Equipment and Used Batteries When disposing your old battery, please refer to the information as follows. Information on Disposal in the Euro ...

    Chevrolet Sonic. Personalization Menu (Radio without Touchscreen)
    Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not ...

    Chevrolet Sonic. California Fuel Requirements
    If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel i ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0092