Nissan Micra: Drive belt
Nissan Micra Owners Manual
HR16DE engine
- Water pump pulley
- Generator pulley
- Crankshaft pulley
- Air conditioner compressor pulley (if so equipped) /Idler pulley (if so equipped)
- Manual tensioner pulley
Tension checking point
| WARNING Be sure the ignition switch is placed in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. |
- Visually inspect the belt for signs of unusual wear, cuts, or fraying. If the belt is in poor condition, have it replaced or adjusted by a NISSAN dealer.
- Have the belt checked regularly for condition.
Other info:
Nissan Micra. Headlight aim
The aim of the headlights may require adjustment
when replacing the headlight assembly or when
the vehicle’s front body has been repaired. When
the adjustment is required, follow these proced ...
Seat Ibiza. Towing and tow-starting
Tow-starting
The use of jump leads is preferable to tow-starting. We recommend that you do
not tow-start your vehicle. Jump-starting is preferable. However, if your vehicle
has to be tow-started: ...
Peugeot 208. Maintenance
Before doing anything under the bonnet, deactivate the Stop & Start system to
avoid any risk of injury resulting from automatic operation of START mode.
This system requires a battery with a sp ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
