Heating
This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.
Ventilation
This mode directs outside air to the side and center vents.
Defrosting or defogging
This mode directs the air to the defrost outlets to defrost/defog the windows.
When the or
position is selected,
press the button to turn on the air conditioner
for better performance. This will dehumidify
the air and help defog the windows.
Bi-level heating
This mode directs cooler air from the side and center vents and warmer air from the floor outlets.
When the temperature control dial is moved to the full hot or full cool position, the air between the vents and the floor outlets is the same temperature.
Heating and defogging
This mode heats the interior and defogs the windshield.
When the or
position is selected,
press the button to turn on the air conditioner
for better performance. This will dehumidify
the air and help defog the windows.
Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation.
Peugeot 208. Parking lamps
Side markers for the vehicle by illumination of the sidelamps on the traffic
side only.
Within one minute of switching off the ignition, operate the lighting control
stalk up or down depending ...
Chevrolet Sonic. Tire Pressure Monitor Operation
This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed
to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted
onto each tire and wheel as ...
Fiat Punto. Restoring the use of the rear seat
Versions with single seat
Perform operations in a reverse order with respect to what previously
described for the boot extension operation. To prevent buckles from
remaining positioned below the cu ...