The coolant level should be close to the "MAX" mark but should never exceed it.
When the engine is warm, the temperature of the coolant is regulated by the fan. This can operate with the ignition off.
For vehicles fitted with a particle emissions filter, the cooling fan may continue to run after stopping the vehicle, even if the engine is cold.
In addition, as the cooling system is pressurised, wait at least one hour after switching off the engine before carrying out any work. To avoid any risk of scalding, unscrew the cap by two turns to allow the pressure to drop. When the pressure has dropped, remove the cap and top up the level.
Changing the coolant
The coolant does not have to be changed.
Fluid specification
The coolant must conform to the manufacturer's recommendations.
Nissan Micra. Seat belt warning light
Both the driver’s and passenger’s front seats are
equipped with a seat belt warning light. The warning
light, located on the instrument panel, will show
the status of the driver and passeng ...
Fiat Punto. Engine codes - bodywork versions
(*) Versions with VDC
Engine
Fuel feed/ignition
Transmission
Modifications or repairs
to the fuel system that are not carried out properly or do not take the
system†...
Chevrolet Sonic. Airbag Readiness Light
This light shows if there is an electrical problem with the airbag system. The
system check includes the airbag sensor(s), passenger sensing system, the pretensioners
(if equipped), the airbag mod ...