Peugeot 208: Moving off
Peugeot 208 Owners Manual
- Select position N.
- Press the brake pedal down fully.
- Start the engine.
N appears in the instrument panel
screen.
N flashes in the instrument panel, accompanied by an audible signal and a message in the instrument panel screen, if the gear lever is not in position N on starting.
Foot on brake flashes
on the instrument panel, accompanied by an audible signal and a message in the instrument
panel screen, if the brake pedal is not pressed on starting.
- Select automated mode (position A ), manual mode (position M ), or reverse (position R).
- Release the parking brake.
- Take your foot off the brake pedal, then accelerate.
AUTO and 1, 1 or R appears in the instrument panel screen.
Other info:
Fiat Punto. Jump starting
If the battery is flat, it is possible to start the engine using an auxiliary
battery with the same capacity or a little higher than the flat one.
Proceed as follows:
Connect positive terminal ...
Skoda Fabia. Breakdown kit
Fig. 145 Principle sketch: Components of the breakdown kit
The kit is located in a box under the floor covering in the luggage
compartment.
Components of the breakdown kit » Fig. 145
Valv ...
Chevrolet Sonic. Hood
To open the hood:
1. Pull the hood release handle inside the vehicle. It is located on the lower
left side of the instrument panel.
2. Go to the front of the vehicle and move the secondary hoo ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
