Peugeot 208: Programming
Peugeot 208 Owners Manual
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
Set the speed value by pressing button 2 or 3 (e.g.: 55 mph (90 km/h)). You can then change the programmed speed using buttons 2 and 3:
- by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press.
- Switch the speed limiter on by pressing button 4 .
- Switch the speed limiter off by pressing button 4: the display confirms that it has been switched off (PAUSE).
- Switch the speed limiter back on by pressing button 4 again.
Other info:
Skoda Fabia. Electrical power windows
WARNING
If the vehicle is locked from the outside, do not leave anybody
in the vehicle
as it is not possible to open the windows from the inside in the event of
an emergency.
The system i ...
Citroen C3. Weights and towed loads
* The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount. Warning: towing using a lightly loaded towing veh ...
Skoda Fabia. Heating
Operation
Fig. 95 Heating: Control elements
Functions of the individual controls » Fig. 95:
Set the temperature (turn to the left: to reduce the temperature, turn
to
the right: to incr ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
