B-Class car manuals
Skoda Fabia: Preparations for using the breakdown kit - Tyre repair - Emergency equipment, and self-help - Do-it-yourself - Skoda Fabia Owners Manual

Skoda Fabia: Preparations for using the breakdown kit

Skoda Fabia Owners Manual

The following preparatory work must be carried out before using the breakdown kit.

  • Park the vehicle as far away as possible from the flow of traffic. Park on as flat and firm a surface as possible.
  • If you are in flowing traffic, switch on the hazard warning lights and set up the warning triangle at the prescribed distance. National legal requirements must be observed.
  • Have all the occupants get out. The passengers should not stand on the road (instead they should remain behind a crash barrier, for instance) while the wheel is being changed.
  • Switch off the engine and move the gearshift lever into Neutral or move the selector lever on the automatic gearbox into position P.
  • Apply the handbrake firmly.
  • Check that you can carry out the repairs with the breakdown kit » page 161.

Uncouple any trailer.

  • Remove the breakdown kit from the boot.
  • Stick the sticker 2 » Fig. 145 on page 162 on the dashboard in the driver's field of view.
  • Do not remove the foreign body, e.g. screw or nail, from the tyre.
  • Unscrew the valve cap.
  • Use the valve remover 1 to unscrew the valve core and place it on a clean surface (rag, paper, etc.).
    Breakdown kit

    Sealing and inflating the tyre

    Other info:

    Ford Fiesta. Brakes
    General Information WARNING The system does not relieve you of your responsibility to drive with due care and attention. Note: Occasional brake noise is normal. If a metal-to-metal, continuous grindin ...

    Skoda Fabia. Breakdown kit
    Fig. 145 Principle sketch: Components of the breakdown kit The kit is located in a box under the floor covering in the luggage compartment. Components of the breakdown kit » Fig. 145 Valv ...

    Chevrolet Sonic. License Plate Lamp
    Lamp Assembly Bulb Assembly 1. Bulb Socket 2. Bulb 3. Lamp Assembly To replace one of these bulbs: 1. Push the left end of the lamp assembly toward the right. 2. Turn the lamp assembly down ...

    Manuals For Car Models



    © 2016-2021 Copyright www.b-auto.net 0.0197