Interior lighting - version 1
Fig. 45 Interior lighting – version 1
Positions of sliding switch A » Fig. 45.
Switch on
Switch off (middle position)
Control by the door contact
switch
The reading lights can be turned on or off by pressing switch B » Fig. 45.
If control of the lights by the door contact switch is enabled (switch
A » Fig. 45 is in the
position), the light will come on when one of the following
occurs.
If control of the lights by the door contact switch is enabled (switch A »
Fig. 45
in the position), the light
will go off when one of the following occurs.
If a door remains open, or if switch A » Fig. 45is in the
position, the interior
light goes out after 10 minutes to prevent the vehicle battery from discharging.
Interior lighting - version 2
Fig. 46 Interior lighting – version 2
Slide switch positions » Fig. 46.
Switch on
Switch off
Control by the door contact
switch (middle position)
The same principles apply for interior lighting version 2 as for » page 60, Interior lighting - version 1.
Rear interior light
Fig. 47 Interior lights at the rear
Press the switch » Fig. 47 to turn the light on or off.
Illuminated storage compartment on the passenger side
Luggage compartment light
The light comes on automatically when the boot lid is opened. If the tailgate remains open for more than 10 minutes, the luggage compartment light switches off automatically.
Chevrolet Sonic. Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
For automatic transmission vehicles, the ignition should turn to LOCK/OFF
only ...
Chevrolet Sonic. Towing the Vehicle
Caution
Incorrectly towing a disabled vehicle may cause damage. The damage would not
be covered by the vehicle warranty. Do not lash or hook to the chassis components
— including the front and ...
Fiat Punto. Front seat belt height adjustment
Always adjust the height of the seat belt to fit the person wearing it. This
precaution could greatly reduce the risk of injury in case of collision.
Correct adjustment is obtained when the be ...