
1. Open the hood. See Hood.

2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise.
3. Remove the bulb from the bulb socket by pulling it straight out.
4. Install the new bulb in the bulb socket.
5. Install the bulb socket into the headlamp assembly by turning clockwise.
Seat Ibiza. Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section. If the engine fails
to start because of a discharged battery, the battery can be connected to the battery
of another vehicle to ...
Skoda Fabia. Fuses
Individual electrical circuits are protected by fuses.
Before replacing a fuse, switch off the ignition and the appropriate
consumer
Find out which fuse belongs to the component that is not o ...
Peugeot 208. Display in the instrumental panel
Gear lever positions
N . Neutral
R . Reverse
1, 2, 3, 4, 5. Gears in sequential mode
AUTO. This comes on when the automated mode is selected. It switches off on changing
to sequential mode.
& ...