

1. Pull the wiper arm a short distance away from the glass (1).
2. Pull the blade out from the arm (2).
It may require extra effort to remove the old blade.

3. Once the blade pin disengages from the wiper arm, remove the wiper blade by sliding the pin out of the guide hole.
4. Reverse the steps to install the new blade.
Nissan Micra. Brake and clutch (if so equipped) fluid
For additional information on brake fluid specification,
refer to “Recommended fluids/lubricants
and capacities” in the “Technical and consumer
information” section of this manual.
...
Mazda 2. Emergency Operation for Starting the Engine
If the KEY warning light (red) illuminates,
or the push button start indicator light
(amber) fl ashes, this could indicate that
the engine may not start using the usual
starting method. Have your ...
Skoda Fabia. Charging
A properly charged vehicle battery is essential for reliably starting the
engine.
Switch off the ignition and all of the electrical components.
Only when performing a “quick-charge”, disco ...