
The tire sealant and compressor kit is located in the rear storage area.
1. Lift the trim cover.

2. Remove the tire sealant canister (1) and the compressor (2).
To store the tire sealant canister and compressor:
1. Attach the sealant/air hose to the sealant canister inlet valve.
2. Return the sealant canister and the compressor to their original storage location.
Mazda 2. Cup Holder
WARNING
Never use a cup holder to hold hot
liquids while the vehicle is moving:
Using a cup holder to hold hot
liquids while the vehicle is moving is
dangerous. If the contents spill, you
could ...
Renault Clio. To lock the system
Press nut 3, screwing it on fully until
it locks in place. Several turns will
be necessary. This operation is essential
to ensure that the wheel is
secure;
return handle 4 to its orig ...
Nissan Micra. Adjusting the screen
The procedure for adjusting the display settings
of the screen differs depending on the type of
screen present on the vehicle.
Firmly apply the brake and place the shift
lever in R (revers ...