
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Manual adjustments
Forwards-backwards adjustment
Raise the control and slide the seat forwards or backwards.


Driver's or passenger's seat height adjustment
Pull the control upwards to raise or push it downwards to lower, as many times as necessary, to obtain the position required.


Seat back angle adjustment
Push the control rearwards.


Additional adjustments
Head restraint height adjustment

The head restraint is fi tted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head.
Never drive with the head restraints removed; they must be in place and adjusted correctly.
Fiat Punto. If an exterior light burns out
For the type of bulb and power rating, see “When needing to change a
bulb”.
FRONT LIGHT UNITS
The front light units contain: sidelights, dipped beam, main beam and
direction indicator bulbs.
...
Mazda 2. Rear Cross Traffi c Alert (RCTA)
The Rear Cross Traffi c Alert (RCTA) system is designed to assist the driver
in checking the
area to the rear of the vehicle on both sides while the vehicle is reversing by
alerting the
driver t ...
Renault Clio. Parking sensor
Operating principle
Ultrasonic detectors, installed in the
rear bumper (depending on the vehicle),
measure the distance between the
vehicle and an obstacle whilst reversing.
This measurement is ...