
Your vehicle has been approved in accordance with the new ISOFIX regulation .
The seats, represented below, are fi tted with regulation ISOFIX mountings:

These are three rings for each seat:
- two rings A , located between the vehicle seat back and cushion, indicated by a label,

- a ring B , behind the seat, referred to as the TOP TETHER for fi xing the upper strap.

This ISOFIX mounting system guarantees you fast, reliable and safe fi tting of the child seat in your vehicle.
The ISOFIX child seats are fi tted with two locks which are secured easily on the two rings A .
Some also have an upper strap which is attached to ring B .
To attach this strap, raise the vehicle seat's head restraint then pass the hook between its rods. Then fi x the hook on ring B and tighten the upper strap.
The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.
For information regarding the ISOFIX child seats which can be installed in your vehicle, consult the summary table for the location of the ISOFIX child seats.
Citroen C3. Running out of fuel (diesel)
If your vehicle is fi tted with an HDI engine,
the fuel circuit must be reprimed if
you run out of fuel.
This system consists of a repriming
pump, a transparent pipe and a degas
screw under t ...
Peugeot 208. Locking the vehicle with exterior perimeter monitoring only
Deactivate the interior volumetric monitoring to avoid unwanted triggering of
the alarm in certain cases such as:
- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your ...
Seat Ibiza. Starting and stopping the engine
The engine can only be started using a genuine SEAT key with the correct code.
– Move the gear lever to the neutral position and depress the clutch pedal fully
and hold it in this position, the ...