Citroen C3: Running out of fuel (diesel)
Citroen C3 Owners Manual
If your vehicle is fi tted with an HDI engine, the fuel circuit must be reprimed if you run out of fuel.
This system consists of a repriming pump, a transparent pipe and a degas screw under the bonnet.
HDi 90 and HDi 110 FAP engines
- Fill the fuel tank with at least fi ve litres of diesel.
- Open the bonnet.
- Depending on version, unclip the cover to gain access to the repriming pump.
- Squeeze and release the repriming pump until fuel appears in the transparent pipe with the green connector.
- Operate the starter until the engine starts.
- Depending on version, put the cover back in position and clip it in place.
- Close the bonnet.
If the engine does not start at the fi rst attempt, do not try again.
Operate the repriming pump again, then the starter.
Other info:
Peugeot 208. Passenger airbag OFF
Refer to the advice given on the label present on both sides of the passenger's
sun visor.
To assure the safety of your child, you must deactivate the passenger's front
airbag when ...
Citroen C3. Trip computer
System which provides current information
concerning the route travelled
(range, consumption…).
Monochrome screen C
Data displays
Press the button, located at the end
of the wiper stalk ...
Peugeot 208. Service indicator
System which informs the driver when the next service is due, in accordance with
the manufacturer's servicing schedule. The point at which the service is due is
calculated from the last indica ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
