This shows the temperature of the engine coolant fluid and begins working when the fluid temperature exceeds approx. 50°C.
Under normal conditions, the needle should hover around the middle of the scale according to the working conditions.
C - low engine coolant temperature.
H - excessive engine coolant temperature.
The turning on of the warning light (B) (on certain versions together with the message shown on the reconfigurable multifunction display) indicates that the coolant fluid temperature is too high; in this case, stop the engine and contact a Fiat Dealership.
If the needle reaches
the red area, stop the engine immediately and contact a Fiat Dealership. |
Mazda 2. Towing/Tiedown Hooks
CAUTION
The towing eyelet should be used
in an emergency (to get the vehicle
out of a ditch or a snow bank, for
example).
When using the towing eyelets,
always pull the lead or chain in ...
Skoda Fabia. Brakes
WARNING
Greater physical effort is required for braking when the engine
is switched
off – there is the risk of an accident
The clutch pedal must be depressed when braking on a vehicle
...
Mazda 2. Vent Operation
Adjusting the Vents
Directing airfl ow
To adjust the direction of airfl ow, move the
adjustment knob.
NOTE
When using the air conditioner under
humid ambient temperature conditions,
the system ...