
Change the shift position in accordance with your driving needs.
■ Shift lever positions

You cannot turn the ignition switch to LOCK
and
remove the key unless the shift lever is in
.
The vehicle may move forward very slightly even in
while the engine is cold.
Depress the brake pedal firmly and, when necessary, apply the parking brake.
■Shift Lever Operation

NOTICE
When you change the shift lever from
to
and
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the lever position before pulling away.
Whichever position the shift lever is in when driving,
a blinking
indicator indicates a
transmission
problem.
Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt.
It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down.
Depress the brake pedal first.
Mazda 2. Rocking the Vehicle
WARNING
Do not spin the wheels at high speed,
and do not allow anyone to stand
behind a wheel when pushing the
vehicle:
When the vehicle is stuck, spinning
the wheels at high speed is dangerous. ...
Mazda 2. Turn and Lane-Change Signals
The ignition must be switched ON to use
the turn and lane-change signals.
Direction Indicators
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The sign ...
Chevrolet Sonic. Connecting and Controlling a USB Drive
The infotainment system can only play back.mp3 and.wma files from a USB drive.
Only the first 2,500 songs are recognized on the device.
When a device is not supported, the message “No supported da ...