
Automatic transmission models
Follow the procedure below if you cannot move the shift lever out of the
position.
■Releasing the Lock

1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Wrap a cloth around the tip of a small flattip screwdriver and remove the cover of the shift lock release slot.
► Put the tip of the flat-tip screwdriver into the slot and remove it as shown in the image.

4. Insert the key into the shift lock release slot.
5. While pushing on the key, press the shift
lever release button and place the shift lever
into
.
► The lock is now released. Have the shift
lever checked by a dealer as soon as
possible.
Peugeot 208. Changing a wiper blade
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to
position the wiper blades vertically on the windscreen.
Removing
Raise the ...
Seat Ibiza. Bulb change
General notes
Before changing any bulb, first turn off the equipment concerned. Do not touch
the bulb glass. Fingerprints vaporise in the heat, causing a reduction in the bulb
life and condensati ...
Peugeot 208. Driving advice
Distribution of loads
Distribute the load in the trailer so that the heaviest items are as close as
possible to the axle and the nose weight approaches the maximum permitted without
exceeding it. ...