B-Class car manuals
Mazda 2: High Beam Control System (HBC) - i-Activsense - When Driving - Mazda2 Owners Manual

Mazda 2: High Beam Control System (HBC)

Mazda2 Owners Manual

Mazda 2 / Mazda2 Owners Manual / When Driving / i-Activsense / High Beam Control System (HBC)

The High Beam Control System (HBC) determines the conditions in front of the vehicle using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch the headlights between high and low beams.

Refer to Warning/Indicator Lights on page 4-37 .

While driving the vehicle at a speed of about 30 km/h (18 mph), the headlights are switched to high beams when there are no vehicles ahead or approaching in the opposite direction.

The system switches the headlights to low beams when one of the following occurs:

  • The system detects a vehicle or the headlights/lights of a vehicle approaching in the opposite direction.
  • The vehicle is driven on roads lined with streetlamps or on roads in well-lit cities and towns.
  • The vehicle is driven at less than about 20 km/h (12 mph).

High Beam Control System (HBC)


The warning light fl ashes when the system has a malfunction.

Refer to Warning Lights on page 4-38 .

CAUTION

Do not adjust the vehicle height, modify the headlight units, or remove the camera, otherwise the system will not operate normally.

NOTE

The timing in which the system switches the headlights changes under the following conditions. If the system does not switch the headlights appropriately, manually switch between high and low beams according to the visibility as well as road and traffi c conditions.

  • When there are sources of light in the area such as street lamps, illuminated signboards, and traffi c signals.
  • When there are refl ective objects in the surrounding area such as refl ective plates and signs.
  • When visibility is reduced under rain, snow and foggy conditions.
  • When driving on roads with sharp curves or hilly terrain
  • When the headlights/rear lamps of vehicles in front of you or in the opposite lane are dim or not illuminated.
  • When there is suffi cient darkness such as at dawn or dusk.
  • When the luggage compartment is loaded with heavy objects or the rear passenger seats are occupied.
  • When visibility is reduced due to a vehicle in front of you spraying water from its tyres onto your windscreen.

To Operate the System

The High Beam Control System (HBC) operates to switch the headlights automatically between high and low beams after the ignition is switched ON and the headlight switch is in the AUTO and high beam position. At the same time, the High Beam Control System (HBC) indicator light (green) in the instrument cluster illuminates.


The High Beam Control System (HBC) determines that it is dark based on the brightness of the surrounding area.

NOTE

  • When the vehicle speed is 30 km/h (18 mph) or higher, the headlights automatically switch to high beams when there are no vehicles ahead or approaching in the opposite direction.

      When the vehicle speed is less than about 20 km/h (12 mph), the High Beam Control System (HBC) switches the headlights to low beams.

  • The low beams may not switch to high beams when cornering.
  • Operation of the High Beam Control System (HBC) function can be disabled. Refer to Personalisation Features on page 9-13 .

Manual Switching

Switching to low beams

Shift the lever to the low beam position.

The High Beam Control System (HBC) indicator light (Green) turns off.

Switching to high beams

Turn the headlight switch to the
position.

The High Beam Control System (HBC) indicator light (Green) turns off and the
is illuminated.

    i-Activsense

    Lane Departure Warning System (LDWS)

    Other info:

    Fiat Punto. Seats
    FRONT SEATS Moving the seat backwards or forwards Lift the lever (A) (on seat internal side) and push the seat forwards or backwards: in the driving position the arms should rest on the rim of the ...

    Mazda 2. Push-Starting
    Do not push-start your Mazda. WARNING Never tow a vehicle to start it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the ...

    Renault Clio. Gear change indicator
    Gear change indicator 1 To obtain optimum consumption levels, a warning light on the instrument panel lets you know the best time to move up or down a gear: move up a gear; move down a gea ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0082