The ignition must be switched ON to use the turn and lane-change signals.
Direction Indicators
Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to fl ash after a turn, manually return the lever to its original position.
The direction indicators (green) in the instrument cluster fl ash according to the operation of the direction indicator lever to show which signal is working.
NOTE
Lane-Change Signals
Move the lever halfway toward the direction of the lane change—until the indicator fl ashes— and hold it there. It will return to the off position when released.
Three-Flash Turn Signal
To signal a lane change, operate the direction indicator lever up or down slightly and release. After releasing the lever, the direction indicator fl ashes three times.
NOTE
The three-fl ash turn signal function can be switched to operable/inoperable using the personalisation function.
Refer to Personalisation Features on page 9-13 .
Fiat Punto. Pretensioners
To increase the efficiency of the front seat belts, the
Fiat Punto is fitted with pretensioners. These devices
“feel”, through a sensor, that a violent crash is in
progress and rewind the seat ...
Chevrolet Sonic. Auxiliary Devices
The optional AUX input allows portable devices to connect to the vehicle using
the 3.5 mm(1/8 in) input jack. The AUX input jack, if equipped, is in the storage
area to the right of the infotainme ...
Skoda Fabia. Care of the interior
Regular and proper care help to retain the efficiency and value of your
vehicle.
We recommend using care products from ŠKODA Original Accessories that are
available from ŠKODA Partners ...