The ignition lock is designed so the key cannot be turned to the LOCK position and removed until the shift lever is placed in the P (Park) position.
When removing the key from the ignition switch, make sure the shift lever is in the P (Park) position.
If the shift lever is not returned to the P (Park) position, the ignition switch cannot be moved to the LOCK position.
To remove the key from the ignition switch:
If the shift lever is shifted to the P (Park) position after the ignition switch is turned to the OFF position or when the ignition switch cannot be turned to the LOCK position, proceed as follows to remove the key.
The shift lever is designed so it cannot be moved out of P (Park) and into any of the other gear positions if the ignition switch is turned to OFF position 1 or if the key is removed from the switch.
The shift lever can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed.
There is an OFF position 1 between the LOCK and ACC positions. The OFF position is indicated by a “1” on the key cylinder.
Skoda Fabia. Tyres and rims
WARNING
National legal requirements must be observed for the use of tyres.
Instructions for the use of tyres
During the first 500 km, new tyres do not offer optimum grip
and appropriate
car ...
Mazda 2. Hazardous Driving
WARNING
Be extremely careful if it is necessary
to downshift on slippery surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
dangerous. The sudden change in tyre
speed c ...
Skoda Fabia. Loosening/tightening wheel bolts
Fig. 141 Changing a wheel: Loosening the wheel bolts
Undoing
Push the wheel wrench onto the wheel bolt as far as the stop1).
Grip the wrench at its end and turn the bolt about one turn in t ...