B-Class car manuals
Nissan Micra: Cruise control operations - Cruise control (if so equipped) - Starting and driving - Nissan Micra Owners Manual

Nissan Micra: Cruise control operations

Nissan Micra Owners Manual

The cruise control allows driving at a speed between 23 - 89 mph (37 - 144 km/h) without keeping your foot on the accelerator pedal.

To turn on the cruise control, push the ON/OFF switch. The CRUISE indicator light in the instrument panel comes on.

To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. Take your foot off the accelerator pedal. Your vehicle maintains the set speed.

  • To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle returns to the previously set speed.
  • The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control.

To cancel the preset speed, use one of the following three methods.

  • Push the CANCEL button.
  • Tap the brake pedal.
  • Push the ON/OFF switch. The CRUISE indicator light in the instrument panel will go out.

The cruise control is automatically canceled if:

  • you depress the brake pedal while pushing the ACCEL/RES or SET/COAST switch.

The preset speed is deleted from memory.

  • the vehicle slows down more than 8 mph (13 km/h) below the set speed.
  • you move the shift lever to N (Neutral).

To reset at a faster cruising speed, use one of the following three methods.

  • Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch.
  • Push and hold the ACCEL/RES switch.

    When the vehicle attains the speed you desire, release the switch.

  • Push and release the ACCEL/RES switch.

    Each time you do this, the set speed increases by about 1 mph (1.6 km/h).

To reset at a slower cruising speed, use one of the following three methods.

  • Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it.
  • Push and hold the COAST/SET switch. Release the switch when the vehicle slows to the desired speed.
  • Push and release the COAST/SET switch.

    Each time you do this, the set speed decreases by about 1 mph (1.6 km/h).

To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 23 mph (37 km/h).

    Precautions on cruise control

    Break-in schedule

    Other info:

    Honda Fit. Oil Check
    We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oi ...

    Citroen C3. Fuel consumption
    (a) .../1: fi tted with low rolling resistance tyres to reduce consumption and emissions of CO2. The fuel consumption fi gures shown here correspond to the values communicated at the time of p ...

    Honda Fit. VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System
    VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regu ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0098