B-Class car manuals
Nissan Micra: Engine cooling system - Maintenance and do-it-yourself - Nissan Micra Owners Manual

Nissan Micra: Engine cooling system

Nissan Micra Owners Manual

Nissan Micra / Nissan Micra Owners Manual / Maintenance and do-it-yourself / Engine cooling system

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round antifreeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary.

WARNING
  • Never remove the radiator or coolant reservoir cap when the engine is hot.

    Wait until the engine and radiator cool down. Serious burns could be caused by high pressure fluid escaping from the radiator. For additional information on precautions, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual.

  • The radiator is equipped with a pressure type radiator cap. To prevent engine damage, use only a Genuine NISSAN radiator cap.

CAUTION
  • Never use any cooling system additives such as radiator sealer. Additives may clog the cooling system and cause damage to the engine, transmission and/or cooling system.
  • When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent. Genuine NISSAN Long Life Antifreeze/Coolant (blue) is pre-diluted to provide antifreeze protection to -34° F (-37° C). If additional freeze protection is needed due to weather where you operate your vehicle, add Genuine NISSAN Long Life Antifreeze/Coolant (blue) concentrate following the directions on the container. If an equivalent coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) is used, follow the coolant manufacturer’s instructions to maintain minimum antifreeze protection to -34° F (-37° C). The use of other types of coolant solutions other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent may damage the engine cooling system.
  • The life expectancy of the factory-fill coolant is 105,000 miles (168,000 km) or 7 years. Mixing any other type of coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue), including Genuine NISSAN Long Life Antifreeze/Coolant (green), or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant.

    For additional information, refer to the NISSAN Service and Maintenance Guide.
Engine compartment check locations

Checking engine coolant level

Other info:

Mazda 2. Automatic Transaxle Controls
Various Lockouts: Indicates that you must depress the brake pedal and hold in the lock-release button to shift (The ignition must be switched ON). Indicates the selector lever can be shifte ...

Mazda 2. Accessory Sockets
Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A). The ignition must be switched to ACC or ON. Type A Type B CAUTION To prevent accesso ...

Skoda Fabia. Sealing and inflating the tyre
Sealing Shake the tyre inflator bottle 10 » Fig. 145 on page 162 vigorously several times. Firmly screw the inflation hose 3 onto the tyre inflator bottle 10 in a clockwise direction. ...

Manuals For Car Models


© 2016-2026 Copyright www.b-auto.net 0.0056