B-Class car manuals
Nissan Micra: Heater operation - Heater and Air Conditioner (manual) (Type B) (if so equipped) - Display screen, heater, air conditioner, audio and phone systems - Nissan Micra Owners Manual

Nissan Micra: Heater operation

Nissan Micra Owners Manual

Nissan Micra / Nissan Micra Owners Manual / Display screen, heater, air conditioner, audio and phone systems / Heater and Air Conditioner (manual) (Type B) (if so equipped) / Heater operation

Heating

This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.

  1. Move the air intake lever to the position
    for normal heating.
  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position between the middle and the hot position.

Ventilation

This mode directs outside air to the side and center vents.

  1. Move the air intake lever to the position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position.

Defrosting or defogging

This mode directs the air to the defrost outlets to defrost/defog the windows.

  1. Move the air intake lever to the position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position between the middle and the hot position.
  • To quickly remove ice or fog from the windows, turn the fan control dial to the maximum position and the temperature control dial to the full hot position.

When the or
position is selected,
press the button to turn on the air conditioner for better performance. This will dehumidify the air and help defog the windows.

Bi-level heating

This mode directs cooler air from the side and center vents and warmer air from the floor outlets.

When the temperature control dial is moved to the full hot or full cool position, the air between the vents and the floor outlets is the same temperature.

  1. Move the air intake lever to position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control
    dial to the desired position.
  4. Turn the temperature control dial to the desired position.

Heating and defogging

This mode heats the interior and defogs the windshield.

  1. Move the air intake lever to the position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position between the middle and the hot position.

When the or
position is selected,
press the button to turn on the air conditioner for better performance. This will dehumidify the air and help defog the windows.

Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation.

    Controls

    Air conditioner operation

    Other info:

    Peugeot 208. "Auto sequential" mode
    In the automated mode, you can resume control temporarily at any time using the steering mounted control paddles. The use of these paddles permits manual selection of the gears in situations whic ...

    Peugeot 208. Front seat belts
    The front seat belts are fitted with a pretensioning and force limiting system. This system improves safety in the front seats in the event of a front or side impact. Depending on the severity o ...

    Nissan Micra. Determining vehicle load capacity
    The load capacity of this vehicle is determined by weight, not by available cargo space. For example, a luggage rack, bike carrier, cartop carrier or similar equipment does not increase load carry ...

    Manuals For Car Models


    © 2016-2025 Copyright www.b-auto.net 0.0095