The ignition switch includes a device that helps prevent accidental removal of the key while driving.
The key can only be removed when the ignition switch is in the LOCK position.
In order for the steering wheel to be locked, it must be turned about 1/8 of a turn clockwise from the straight up position.
To lock the steering wheel, place the ignition switch in the LOCK position. Remove the key. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left.
Fiat Punto. Wheels
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless tyres with radial carcass. The
homologated tyres are listed in the Log book.
IMPORTANT In the event of discrepancies between the information
...
Fiat Punto. Engine coolant temperature gauge
This shows the temperature of the engine coolant fluid and begins working
when the fluid temperature exceeds
approx. 50°C.
Under normal conditions, the needle should hover around the middle of ...
Seat Ibiza. Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section. If the engine fails
to start because of a discharged battery, the battery can be connected to the battery
of another vehicle to ...