P (Park) is recommended.
The shift lever cannot be moved out of the P (Park) position and into any of the other gear positions if the ignition switch is placed in the OFF position or if the key is removed from the ignition switch.
The starter is designed not to operate if the shift lever is in any of the driving positions.
Manual transmission: Move the shift lever to N (Neutral). Depress the clutch pedal to the floor while cranking the engine.
Crank the engine for 5-6 seconds. After cranking the engine, release the accelerator pedal. Crank the engine with your foot off the accelerator pedal by placing the ignition in the START position.
Release the key when the engine starts. If the engine starts, but fails to run, repeat the above procedure.
CAUTION Do not operate the starter for more than 15 seconds at a time. If the engine does not start, turn the key off and wait 10 seconds before cranking again, otherwise the starter could be damaged. |
Mazda 2. Traction Control System (TCS)
The Traction Control System (TCS)
enhances traction and safety by controlling
engine torque and braking. When the TCS
detects driving wheel slippage, it lowers
engine torque and operates the brake ...
Honda Fit. Adding Engine Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten
it securely.
4. Wait for three minutes and recheck the
engine oil dipstick.
...
Nissan Micra. Locking with power door lock switch
(if so equipped)
To lock all the doors without a key, push the door
lock switch to the lock position 1 . When locking
the door this way, be certain not to leave the key
inside the vehicle.
To unlock all the ...