The supplemental air bag warning light,
displaying in the instrument panel,
monitors
the circuits for the air bag systems and all
related wiring.
When the ignition switch is in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational.
If any of the following conditions occur, the front air bag needs servicing:
Under these conditions, the front air bag may not operate properly. It must be checked and repaired.
Take your vehicle to the nearest NISSAN dealer.
WARNING If the supplemental air bag warning light is on, it could mean that the front air bag will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible. |
Repair and replacement procedure
The front air bags, side air bags, curtain air bags and pretensioner(s) are designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light remains illuminated after inflation has occurred.
Repair and replacement of these supplemental air bag systems should be done only by a NISSAN dealer.
When maintenance work is required on the vehicle, the front air bags, side air bags, curtain air bags, pretensioner(s) and related parts should be pointed out to the person performing the maintenance.
The ignition switch should always be placed in the LOCK position when working under the hood or inside the vehicle.
WARNING
|
Citroen C3. Safety
Selection of the left or right direction indicators
to signal a change of direction
of the vehicle.
Lower the lighting stalk fully when
moving to the left.
Raise the lighting stalk full ...
Peugeot 208. A few definitions
Range (miles or km)
This indicates the distance which can still be travelled with the fuel remaining
in the tank in relation to the average fuel consumption over the last few miles
(kilometres) ...
Renault Clio. Environment
Your vehicle has been designed with
respect for the environment in mind for
its entire service life: during production,
use and at the end of its life.
This commitment is illustrated by the of
...