B-Class car manuals
Peugeot 208: Access to the tools - Changing a wheel - Practical information - Peugeot 208 Owners Manual

Peugeot 208: Access to the tools

Peugeot 208 Owners Manual


The tools are installed in the boot under the floor.

To gain access to them:

  • open the boot,
  • lift the floor and remove it.
  • remove the carrier box containing the tools.


List of tools

All of these tools are specific to your vehicle and can vary according to the level of equipment. Do not use them for other purposes.

1. Wheelbrace. For removing the wheel trim and removing the wheel bolts.

2. Jack with integral handle. For raising the vehicle.

3. "Bolt cover" tool. For removing the bolt protectors (covers) on alloy wheels.

4. Socket for the security bolts (located in the glove box). For adapting the wheelbrace to the special "security" bolts.

5. Towing eye. See "Towing the vehicle".

Wheel with trim

When refitting the wheel , refit the trim starting by placing its notch facing the valve and press around its edge with the palm of your hand.

    Changing a wheel

    Access to the spare wheel

    Other info:

    Seat Ibiza. Introduction
    Before driving: remember your seat belt! Properly worn seat belts can save lives! In this chapter you will learn why seat belts are so important, how they work and how to properly fasten, adjust an ...

    Ford Fiesta. Introduction
    About This Manual Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and plea ...

    Honda Fit. How to Refuel
    1. Stop your vehicle with the service station pump on the left side of the vehicle in the rear. 2. Turn off the engine. 3. Press the area indicated by the arrow to release the fuel fill door. Y ...

    Manuals For Car Models


    © 2016-2025 Copyright www.b-auto.net 0.0086