Peugeot 208: Failure of the remote control
Peugeot 208 Owners Manual
To deactivate the monitoring functions:
- Unlock the vehicle using the key in the driver's door lock.
- Open the door; the alarm is triggered.
- Switch on the ignition; the alarm stops. The indicator lamp in the button goes off.
Locking the vehicle without activating the alarm
Lock or deadlock the vehicle using the key in the driver's door lock.
Malfunction
When the ignition is switched on, fixed illumination of the indicator lamp in the button indicates a malfunction of the system. Have it checked by a PEUGEOT dealer or a qualified workshop.
Automatic activation
2 minutes after the last door or the boot is closed, the system is activated automatically.
To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control.
Other info:
Nissan Micra. Before starting the engine
Make sure the area around the vehicle is
clear.
Check fluid levels such as engine oil, coolant,
brake and clutch fluid (if so equipped),
and windshield-washer fluid as frequently as
possi ...
Fiat Punto. Code card (where required)
The car is delivered with two copies of the key and the CODE card
which bears the following:
the electronic code (A) to be used for emergency starting (see
“Emergency starting” in section ...
Chevrolet Sonic. Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Sedan Taillamp Shown, Hatchback Taillamp Similar
1. Back-up Lamp
2. Turn Signal Lamp
3. Stop Lamp/Taillamp
4. Sidemarker Lamp
To replace one of these bulbs:
1. Open the trunk.
2. Remove the ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
