

R. Reverse
With your foot on the brake, move the lever forwards to select this position.
N. Neutral.
With your foot on the brake, select this position to start the engine.
A . Automated mode.
Move the lever backwards to select this mode.
M. + / - Sequential mode with manual gear changing.
Move the lever backwards, then to the left to select this mode, then:
- push forwards to change up a gear, - or push backwards to change down a gear.
Mazda 2. If a Warning Light Turns On or Flashes
If any warning light turns on/fl ashes, take appropriate action for each
light. There is no
problem if the light turns off, however if the light does not turn off or turns
on/fl ashes again,
con ...
Peugeot 208. Cruise control
System which automatically maintains the speed of the vehicle at the value programmed
by the driver, without any action on the accelerator pedal.
The cruise control is switched on manually: it requ ...
Citroen C3. Changing a bulb
Procedure for replacing a faulty bulb
with a new bulb .
In some climatic conditions (e.g.
low temperature or humidity),
the presence of misting on the
internal surface of the glass of
the h ...