Peugeot 208: Operating fault
Peugeot 208 Owners Manual
When the ignition is on, the lighting
of this warning lamp, accompanied by an audible signal and a message in the multifunction
screen, indicates a gearbox fault.
In this case, the gearbox switches to back-up mode and is locked in 3rd gear. You may feel a substantial knock when changing from P to R and from N to R . This will not cause any damage to the gearbox.
Do not exceed 60 mph (100 km/h), local speed restrictions permitting.
Contact a PEUGEOT dealer or a qualified workshop as soon as possible.
There is a risk of damage to the gearbox:
- if you press the accelerator and brake pedals at the same time, - if you force the movement of the gear lever from the P position to another position when the battery is flat.
To reduce fuel consumption when at a prolonged standstill with the engine running (traffic jam...), put the gear lever in the N position and apply the parking brake.
Other info:
Honda Fit. HFL Menus
The ignition switch must be in ACCESSORY
or ON
to use HFL.
To use HFL, you must first pair your Bluetooth-compatible cell phone to the
system while the vehicle is parked.
Phone Setup
&# ...
Fiat Punto. Car inactivity
If the car is to be left inactive for longer than a month,
the following precautions should be noted:
park the car in covered, dry and if possible wellventilated
premises;
engage a gear;
ch ...
Seat Ibiza. Brief introduction
Dear SEAT Driver
Safety first!
This chapter contains important information, tips, suggestions and warnings that
you should read and follow in the interest of your own safety and the safety of
yo ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
