B-Class car manuals
Peugeot 208: Operating fault - Cruise control - Driving - Peugeot 208 Owners Manual

Peugeot 208: Operating fault

Peugeot 208 Owners Manual


In the event of a cruise control malfunction, the speed is cleared resulting in flashing of the dashes. Have it checked by a PEUGEOT dealer or a qualified workshop.

When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed changing buttons: this may result in a very rapid change in the speed of your vehicle.

Do not use the cruise control on slippery roads or in heavy traffic. On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the programmed speed. To avoid any risk of jamming of the pedals:

- ensure that the mat is positioned correctly, - never fit one mat on top of another.

    Leaving cruise control mode

    Memorising speeds

    Other info:

    Fiat Punto. General instructions
    When a light is not working, check that the corresponding fuse is intact before changing a bulb. For the location of fuses, refer to the paragraph “If a fuse blows” in this section; Bef ...

    Renault Clio. Wipers (replacing blades)
    Replacing windscreen wiper blades 1 With the ignition off, lift wiper arm 2; turn blade 1. Lower tab 3, by pressing on either side A. Then push the blade forwards B, to release ...

    Renault Clio. Boot storage
    Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3. ...

    Manuals For Car Models


    © 2016-2026 Copyright www.b-auto.net 0.0058